13 odpowiedzi w tym temacie

[pijany marins]

Witam , otóz jako 2 system operacyjny dzis sobie zainstalowałęm Ubuntu 10.10 . Otóż mam taki problem iż nie mam zielonego pojęcia jak zainstalwac tam sterownik do internetu. Mam go na dysku lecz nie ma zadnego programu ktory mogły to zainstalowac. Otóż starsza wersja linxua tj 9.10 była zainstalowana internet chodził , zainstlowałem ten sterownik. Otóż musiałem ją odinstalowac bo Grub nie działał linxowski. Bo ogólnie jako 1 zainstalowałem linux , potem win xp i xp nadpisał bootera pod swojego i włączał sie xp i nie było wyboru.(kto w temacie to bd wiedział ocb). Otóz mam kartę taką D-Link Air Plus 520+. I niestety wujaszek google nie pomógł.
może ktoś sie spotkał z takim problemem.

[Amciek]

sudo lspci | grep ethernet

wklej co Ci pokazuje :]

zawsze instaluj linuxa jako ostatni system, wtedy w grubie masz możliwośc wyboru wszystkiego

co do samego gruba polecam, kiedyś sam się na tym uczylem http://www.paslek.mp...rub-rescue.html

Użytkownik Amciek edytował ten post 17 grudnia 2010 - 09:32

[pijany marins]

wpisałem lspci

00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1)
00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2)
00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2)
00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3)
00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3)
00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1)
00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2)
00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2)
00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2)
00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2)
00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
01:06.0 Network controller: Texas Instruments ACX 100 22Mbps Wireless Interface
02:00.0 VGA compatible controller: nVidia Corporation G96 [GeForce 9500 GT] (rev a1)

wpisując grep ethernet nic nie pokazuje.







próbowałem jeszcze z instalacją z płyty tego

ndiswrapper

, ale niestety nie dało się zainstalować , bo nie było tego tam . A co do gruba próbowałem zrobic na 9.10 ale nie dało rady przez live cd według jakiegos tam artykułu.


Dodam jeszcze ze linux 64 bitowy jeśli coś to zmienia;]

Użytkownik pijany marins edytował ten post 17 grudnia 2010 - 09:46

[Amciek]

baaaardzo dziwne w sumie, 520 to starsza karta jest ;] powinno wykryć bez problemu. Wrzuć też

sudo dmesg

albo najpierw spróbuj wejść w menu System -> Sieci czy jakoś tak i sprawdź, czy wykrywa wlan0 albo ath0, nie pamiętam jaki chipset ma ta 520

sprawdź też

sudo ifconfig

[pijany marins]

Wpisałem to co kazałes i oto wyniki .

sprawdziłem system-sieci i tam jest tylko eth0 nic więcej. ale ja mam ogólnie sterowniki do tego chipsetu na win , ale nie na linka;/






if config wyswietla to

eth0      Link encap:Ethernet  HWaddr 00:24:1d:5c:c8:18  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:41 Base address:0xa000 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:16 errors:0 dropped:0 overruns:0 frame:0
          TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:960 (960.0 B)  TX bytes:960 (960.0 B)

a sudo dmesg

[    0.341128] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.341131] pci 0000:00:02.1: PME# disabled
[    0.341178] pci 0000:00:05.0: reg 10: [mem 0xfe028000-0xfe02bfff]
[    0.341200] pci 0000:00:05.0: PME# supported from D3hot D3cold
[    0.341203] pci 0000:00:05.0: PME# disabled
[    0.341229] pci 0000:00:06.0: reg 20: [io  0xf000-0xf00f]
[    0.341256] pci 0000:00:07.0: reg 10: [mem 0xfe02d000-0xfe02dfff]
[    0.341258] pci 0000:00:07.0: reg 14: [io  0xec00-0xec07]
[    0.341277] pci 0000:00:07.0: supports D1 D2
[    0.341279] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.341282] pci 0000:00:07.0: PME# disabled
[    0.341297] pci 0000:00:08.0: reg 10: [io  0x09f0-0x09f7]
[    0.341299] pci 0000:00:08.0: reg 14: [io  0x0bf0-0x0bf3]
[    0.341302] pci 0000:00:08.0: reg 18: [io  0x0970-0x0977]
[    0.341305] pci 0000:00:08.0: reg 1c: [io  0x0b70-0x0b73]
[    0.341307] pci 0000:00:08.0: reg 20: [io  0xd800-0xd80f]
[    0.341310] pci 0000:00:08.0: reg 24: [mem 0xfe02c000-0xfe02cfff]
[    0.341347] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.341349] pci 0000:00:09.0: PME# disabled
[    0.341452] pci 0000:01:06.0: reg 10: [io  0xcc00-0xcc1f]
[    0.341456] pci 0000:01:06.0: reg 14: [mem 0xfdeff000-0xfdefffff]
[    0.341461] pci 0000:01:06.0: reg 18: [mem 0xfdee0000-0xfdeeffff]
[    0.341484] pci 0000:01:06.0: supports D1 D2
[    0.341485] pci 0000:01:06.0: PME# supported from D0 D1 D2 D3hot
[    0.341488] pci 0000:01:06.0: PME# disabled
[    0.341513] pci 0000:00:04.0: PCI bridge to [bus 01-01] (subtractive decode)
[    0.341515] pci 0000:00:04.0:   bridge window [io  0xc000-0xcfff]
[    0.341518] pci 0000:00:04.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.341520] pci 0000:00:04.0:   bridge window [mem 0xfdf00000-0xfdffffff pref]
[    0.341522] pci 0000:00:04.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.341524] pci 0000:00:04.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.341526] pci 0000:00:04.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.341528] pci 0000:00:04.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    0.341530] pci 0000:00:04.0:   bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
[    0.341559] pci 0000:02:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
[    0.341566] pci 0000:02:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.341572] pci 0000:02:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
[    0.341576] pci 0000:02:00.0: reg 24: [io  0xbc00-0xbc7f]
[    0.341580] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[    0.360023] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[    0.360028] pci 0000:00:09.0:   bridge window [io  0xb000-0xbfff]
[    0.360030] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff]
[    0.360033] pci 0000:00:09.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.360047] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.360186] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    0.383889] ACPI: PCI Interrupt Link [LNK1] (IRQs *5 7 9 10 11 14 15)
[    0.383981] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.384073] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.384163] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.384252] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.384341] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.384429] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.384518] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.384607] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.384695] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.384785] ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15)
[    0.384880] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
[    0.384969] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
[    0.385058] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.385148] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15)
[    0.385237] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15)
[    0.385330] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.385422] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[    0.385515] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.385639] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
[    0.385758] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[    0.385875] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[    0.385991] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[    0.386107] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[    0.386223] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[    0.386339] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[    0.386455] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[    0.386575] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0, disabled.
[    0.386691] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[    0.386807] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[    0.386923] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[    0.387040] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[    0.387156] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[    0.387272] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[    0.387390] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[    0.387506] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[    0.387625] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[    0.387741] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
[    0.387771] HEST: Table is not found!
[    0.387832] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.387834] vgaarb: loaded
[    0.387928] SCSI subsystem initialized
[    0.387987] libata version 3.00 loaded.
[    0.388021] usbcore: registered new interface driver usbfs
[    0.388029] usbcore: registered new interface driver hub
[    0.388043] usbcore: registered new device driver usb
[    0.388164] ACPI: WMI: Mapper loaded
[    0.388164] PCI: Using ACPI for IRQ routing
[    0.388164] PCI: pci_cache_line_size set to 64 bytes
[    0.388165] reserve RAM buffer: 000000000009f800 - 000000000009ffff 
[    0.388167] reserve RAM buffer: 00000000cfff0000 - 00000000cfffffff 
[    0.388229] NetLabel: Initializing
[    0.388230] NetLabel:  domain hash size = 128
[    0.388231] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.388240] NetLabel:  unlabeled traffic allowed by default
[    0.388259] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.388264] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
[    0.388267] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    0.410042] Switching to clocksource tsc
[    0.415427] AppArmor: AppArmor Filesystem Enabled
[    0.415441] pnp: PnP ACPI init
[    0.415457] ACPI: bus type pnp registered
[    0.418280] pnp: PnP ACPI: found 13 devices
[    0.418281] ACPI: ACPI bus type pnp unregistered
[    0.418290] system 00:01: [io  0x1000-0x107f] has been reserved
[    0.418292] system 00:01: [io  0x1080-0x10ff] has been reserved
[    0.418294] system 00:01: [io  0x1400-0x147f] has been reserved
[    0.418296] system 00:01: [io  0x1480-0x14ff] has been reserved
[    0.418297] system 00:01: [io  0x1800-0x187f] has been reserved
[    0.418299] system 00:01: [io  0x1880-0x18ff] has been reserved
[    0.418301] system 00:01: [mem 0xfefe0000-0xfefe01ff] has been reserved
[    0.418303] system 00:01: [mem 0xfefe1000-0xfefe10ff] has been reserved
[    0.418307] system 00:02: [io  0x04d0-0x04d1] has been reserved
[    0.418309] system 00:02: [io  0x0800-0x087f] has been reserved
[    0.418311] system 00:02: [io  0x0295-0x0296] has been reserved
[    0.418313] system 00:02: [io  0x0290-0x0294] has been reserved
[    0.418317] system 00:0b: [mem 0xe0000000-0xe7ffffff] has been reserved
[    0.418321] system 00:0c: [mem 0x000cde00-0x000cffff] has been reserved
[    0.418323] system 00:0c: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.418325] system 00:0c: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.418327] system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.418329] system 00:0c: [mem 0xcfff0000-0xcfffffff] could not be reserved
[    0.418331] system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved
[    0.418333] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.418335] system 00:0c: [mem 0x00100000-0xcffeffff] could not be reserved
[    0.418337] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.418339] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.423697] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[    0.423699] pci 0000:00:04.0:   bridge window [io  0xc000-0xcfff]
[    0.423702] pci 0000:00:04.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.423705] pci 0000:00:04.0:   bridge window [mem 0xfdf00000-0xfdffffff pref]
[    0.423710] pci 0000:02:00.0: BAR 6: assigned [mem 0xfb000000-0xfb07ffff pref]
[    0.423712] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[    0.423714] pci 0000:00:09.0:   bridge window [io  0xb000-0xbfff]
[    0.423716] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff]
[    0.423718] pci 0000:00:09.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.423725] pci 0000:00:04.0: setting latency timer to 64
[    0.423729] pci 0000:00:09.0: setting latency timer to 64
[    0.423731] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.423733] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.423734] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.423736] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    0.423738] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff]
[    0.423739] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    0.423741] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
[    0.423743] pci_bus 0000:01: resource 2 [mem 0xfdf00000-0xfdffffff pref]
[    0.423744] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7]
[    0.423746] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff]
[    0.423747] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[    0.423749] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000dffff]
[    0.423750] pci_bus 0000:01: resource 8 [mem 0xd0000000-0xfebfffff]
[    0.423752] pci_bus 0000:02: resource 0 [io  0xb000-0xbfff]
[    0.423754] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbffffff]
[    0.423755] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.423780] NET: Registered protocol family 2
[    0.423895] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.424837] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.427253] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.427551] TCP: Hash tables configured (established 524288 bind 65536)
[    0.427553] TCP reno registered
[    0.427562] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.427591] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.427688] NET: Registered protocol family 1
[    0.427806] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.427850] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.427903] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.427954] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.428009] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.428028] pci 0000:02:00.0: Boot video device
[    0.428030] PCI: CLS 4 bytes, default 64
[    0.497895] Freeing initrd memory: 10744k freed
[    0.501089] PCI-DMA: Disabling AGP.
[    0.501164] PCI-DMA: aperture base @ 20000000 size 65536 KB
[    0.501166] PCI-DMA: using GART IOMMU.
[    0.501169] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    0.503780] Scanning for low memory corruption every 60 seconds
[    0.503903] audit: initializing netlink socket (disabled)
[    0.503912] type=2000 audit(1292623303.490:1): initialized
[    0.513388] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.514385] VFS: Disk quotas dquot_6.5.2
[    0.514430] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.514879] fuse init (API version 7.14)
[    0.514978] msgmni has been set to 7919
[    0.516603] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.516606] io scheduler noop registered
[    0.516607] io scheduler deadline registered
[    0.516633] io scheduler cfq registered (default)
[    0.516757] pcieport 0000:00:09.0: setting latency timer to 64
[    0.516773]   alloc irq_desc for 40 on node 0
[    0.516775]   alloc kstat_irqs on node 0
[    0.516781] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
[    0.516891] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.516915] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.517040] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.517044] ACPI: Power Button [PWRB]
[    0.517078] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.517081] ACPI: Power Button [PWRF]
[    0.517265] ACPI: acpi_idle registered with cpuidle
[    0.519602] ERST: Table is not found!
[    0.519748] Linux agpgart interface v0.103
[    0.519751] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.519837] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.520055] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.520719] brd: module loaded
[    0.521020] loop: module loaded
[    0.521235] pata_acpi 0000:00:06.0: setting latency timer to 64
[    0.521548] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[    0.521552]   alloc irq_desc for 23 on node 0
[    0.521553]   alloc kstat_irqs on node 0
[    0.521562] pata_acpi 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[    0.521574] pata_acpi 0000:00:08.0: setting latency timer to 64
[    0.521579] pata_acpi 0000:00:08.0: PCI INT A disabled
[    0.521868] Fixed MDIO Bus: probed
[    0.521890] PPP generic driver version 2.4.2
[    0.521930] tun: Universal TUN/TAP device driver, 1.6
[    0.521931] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.521992] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.522291] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[    0.522296]   alloc irq_desc for 22 on node 0
[    0.522297]   alloc kstat_irqs on node 0
[    0.522306] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22
[    0.522339] ehci_hcd 0000:00:02.1: setting latency timer to 64
[    0.522341] ehci_hcd 0000:00:02.1: EHCI Host Controller
[    0.522395] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[    0.522416] ehci_hcd 0000:00:02.1: debug port 1
[    0.522422] ehci_hcd 0000:00:02.1: cache line size of 4 is not supported
[    0.522442] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000
[    0.539882] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    0.540001] hub 1-0:1.0: USB hub found
[    0.540004] hub 1-0:1.0: 10 ports detected
[    0.540101] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.540383] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
[    0.540388]   alloc irq_desc for 21 on node 0
[    0.540389]   alloc kstat_irqs on node 0
[    0.540400] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 21 (level, low) -> IRQ 21
[    0.540417] ohci_hcd 0000:00:02.0: setting latency timer to 64
[    0.540419] ohci_hcd 0000:00:02.0: OHCI Host Controller
[    0.540452] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[    0.540476] ohci_hcd 0000:00:02.0: irq 21, io mem 0xfe02f000
[    0.601977] hub 2-0:1.0: USB hub found
[    0.601982] hub 2-0:1.0: 10 ports detected
[    0.602072] uhci_hcd: USB Universal Host Controller Interface driver
[    0.602164] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.602165] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.602303] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.602389] mice: PS/2 mouse device common for all mice
[    0.602474] rtc_cmos 00:05: RTC can wake from S4
[    0.602498] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.602533] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    0.602594] device-mapper: uevent: version 1.0.3
[    0.602672] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[    0.602746] device-mapper: multipath: version 1.1.1 loaded
[    0.602750] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.602923] cpuidle: using governor ladder
[    0.602925] cpuidle: using governor menu
[    0.603105] TCP cubic registered
[    0.603185] NET: Registered protocol family 10
[    0.603419] lo: Disabled Privacy Extensions
[    0.603550] NET: Registered protocol family 17
[    0.603580] powernow-k8: Found 1 AMD Athlon(tm) II X2 245 Processor (2 cpu cores) (version 2.20.00)
[    0.603614] powernow-k8:    0 : pstate 0 (2900 MHz)
[    0.603616] powernow-k8:    1 : pstate 1 (2200 MHz)
[    0.603617] powernow-k8:    2 : pstate 2 (1700 MHz)
[    0.603618] powernow-k8:    3 : pstate 3 (800 MHz)
[    0.603781] PM: Resume from disk failed.
[    0.603794] registered taskstats version 1
[    0.603933]   Magic number: 6:610:47
[    0.604014] rtc_cmos 00:05: setting system clock to 2010-12-17 22:01:43 UTC (1292623303)
[    0.604016] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.604017] EDD information not available.
[    0.604066] Freeing unused kernel memory: 908k freed
[    0.604280] Write protecting the kernel read-only data: 10240k
[    0.604400] Freeing unused kernel memory: 416k freed
[    0.604620] Freeing unused kernel memory: 1644k freed
[    0.615911] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    0.621399] udev[100]: starting version 163
[    0.677543] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    0.677946] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20
[    0.677950]   alloc irq_desc for 20 on node 0
[    0.677951]   alloc kstat_irqs on node 0
[    0.677960] forcedeth 0000:00:07.0: PCI INT A -> Link[APCH] -> GSI 20 (level, low) -> IRQ 20
[    0.677963] forcedeth 0000:00:07.0: setting latency timer to 64
[    1.140045] usb 2-4: new low speed USB device using ohci_hcd and address 2
[    1.200784] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:24:1d:5c:c8:18
[    1.200787] forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3
[    1.200860] sata_nv 0000:00:08.0: version 3.5
[    1.200871] sata_nv 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[    1.200914] sata_nv 0000:00:08.0: setting latency timer to 64
[    1.200955] scsi0 : sata_nv
[    1.201144] scsi1 : sata_nv
[    1.201268] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 23
[    1.201270] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 23
[    1.201336] pata_amd 0000:00:06.0: version 0.4.1
[    1.201434] pata_amd 0000:00:06.0: setting latency timer to 64
[    1.201506] scsi2 : pata_amd
[    1.201544] scsi3 : pata_amd
[    1.201957] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    1.201959] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    1.690067] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.710347] ata1.00: ATA-8: ST3500418AS, CC37, max UDMA/133
[    1.710350] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.750356] ata1.00: configured for UDMA/133
[    1.750523] scsi 0:0:0:0: Direct-Access 	ATA      ST3500418AS      CC37 PQ: 0 ANSI: 5
[    1.750650] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.750726] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.750786] sd 0:0:0:0: [sda] Write Protect is off
[    1.750789] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.750812] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.751027]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[    1.831486] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.240069] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.260160] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS40, NL01, max UDMA/100
[    2.300170] ata2.00: configured for UDMA/100
[    2.308759] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH22NS40  NL01 PQ: 0 ANSI: 5
[    2.330548] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.330552] Uniform CD-ROM driver Revision: 3.20
[    2.330656] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.330701] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.330773] ata4: port disabled. ignoring.
[    2.335325] usbcore: registered new interface driver hiddev
[    2.341214] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input3
[    2.341299] generic-usb 0003:045E:0039.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:02.0-4/input0
[    2.341315] usbcore: registered new interface driver usbhid
[    2.341316] usbhid: USB HID core driver
[    3.197847] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[    9.717332] udev[401]: starting version 163
[    9.795964] EDAC MC: Ver: 2.1.0 Sep 19 2010
[    9.806628] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
[    9.806654] i2c i2c-1: nForce2 SMBus adapter at 0xf400
[    9.835787] EDAC amd64_edac:  Ver: 3.3.0 Sep 19 2010
[    9.856141] lp: driver loaded but no devices found
[    9.888315] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[    9.888322] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[    9.888324]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[    9.888325]  (Note that use of the override may cause unknown side effects.)
[    9.888345] amd64_edac: probe of 0000:00:18.2 failed with error -22
[    9.917698] [drm] Initialized drm 1.1.0 20060810
[    9.918939] parport_pc 00:09: reported by Plug and Play ACPI
[    9.918982] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    9.923064] type=1400 audit(1292619712.810:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=726 comm="apparmor_parser"
[    9.923268] type=1400 audit(1292619712.810:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=726 comm="apparmor_parser"
[    9.923383] type=1400 audit(1292619712.810:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=726 comm="apparmor_parser"
[    9.940180] EXT4-fs (sda8): re-mounted. Opts: errors=remount-ro
[    9.959013] ppdev: user-space parallel port driver
[    9.971211] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16
[    9.971216]   alloc irq_desc for 16 on node 0
[    9.971218]   alloc kstat_irqs on node 0
[    9.971227] nouveau 0000:02:00.0: PCI INT A -> Link[APC8] -> GSI 16 (level, low) -> IRQ 16
[    9.971231] nouveau 0000:02:00.0: setting latency timer to 64
[    9.990619] [drm] nouveau 0000:02:00.0: Detected an NV50 generation card (0x096000c1)
[    9.991440] lp0: using parport0 (interrupt-driven).
[    9.994637] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PRAMIN
[   10.047368] [drm] nouveau 0000:02:00.0: ... appears to be valid
[   10.047371] [drm] nouveau 0000:02:00.0: BIT BIOS found
[   10.047373] [drm] nouveau 0000:02:00.0: Bios version 62.94.3c.00
[   10.047376] [drm] nouveau 0000:02:00.0: TMDS table revision 2.0 not currently supported
[   10.047378] [drm] nouveau 0000:02:00.0: Found Display Configuration Block version 4.0
[   10.047380] [drm] nouveau 0000:02:00.0: Raw DCB entry 0: 02000300 00000028
[   10.047382] [drm] nouveau 0000:02:00.0: Raw DCB entry 1: 04000302 00020030
[   10.047384] [drm] nouveau 0000:02:00.0: Raw DCB entry 2: 04011310 00000028
[   10.047386] [drm] nouveau 0000:02:00.0: Raw DCB entry 3: 02022332 00c200a0
[   10.047388] [drm] nouveau 0000:02:00.0: DCB connector table: VHER 0x40 5 16 4
[   10.047390] [drm] nouveau 0000:02:00.0:   0: 0x01000030: type 0x30 idx 0 tag 0xff
[   10.047392] [drm] nouveau 0000:02:00.0:   1: 0x00000100: type 0x00 idx 1 tag 0xff
[   10.047394] [drm] nouveau 0000:02:00.0:   2: 0x00020261: type 0x61 idx 2 tag 0x52
[   10.047401] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xD101
[   10.067731] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23
[   10.067736] HDA Intel 0000:00:05.0: PCI INT B -> Link[AAZA] -> GSI 23 (level, low) -> IRQ 23
[   10.067738] hda_intel: Disable MSI for Nvidia chipset
[   10.067763] HDA Intel 0000:00:05.0: setting latency timer to 64
[   10.140155] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xD4F2
[   10.180036] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xE542
[   10.180046] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xE68B
[   10.200146] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xE8F3
[   10.200149] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table at offset 0xE958
[   10.222662] type=1400 audit(1292619713.110:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=934 comm="apparmor_parser"
[   10.222683] type=1400 audit(1292619713.110:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=935 comm="apparmor_parser"
[   10.222891] type=1400 audit(1292619713.110:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=935 comm="apparmor_parser"
[   10.223007] type=1400 audit(1292619713.110:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=935 comm="apparmor_parser"
[   10.224791] type=1400 audit(1292619713.110:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=936 comm="apparmor_parser"
[   10.224966] type=1400 audit(1292619713.110:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=938 comm="apparmor_parser"
[   10.225232] type=1400 audit(1292619713.110:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=938 comm="apparmor_parser"
[   10.230058] [drm] nouveau 0000:02:00.0: 0xE958: Condition still not met after 20ms, skipping following opcodes
[   10.230067] [drm] nouveau 0000:02:00.0: 0xC0CE: parsing output script 0
[   10.230073] [drm] nouveau 0000:02:00.0: 0xC0CE: parsing output script 0
[   10.230085] [drm] nouveau 0000:02:00.0: Detected 1024MiB VRAM
[   10.294040]   alloc irq_desc for 41 on node 0
[   10.294043]   alloc kstat_irqs on node 0
[   10.294051] forcedeth 0000:00:07.0: irq 41 for MSI/MSI-X
[   10.294231] eth0: no link during initialization.
[   10.295104] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   10.336607] [TTM] Zone  kernel: Available graphics memory: 2028852 kiB.
[   10.336609] [TTM] Initializing pool allocator.
[   10.348062] [drm] nouveau 0000:02:00.0: 512 MiB GART (aperture)
[   10.348445] [drm] nouveau 0000:02:00.0: Allocating FIFO number 1
[   10.351263] [drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 1
[   10.351725] [drm] nouveau 0000:02:00.0: Detected a DAC output
[   10.351727] [drm] nouveau 0000:02:00.0: Detected a TMDS output
[   10.351728] [drm] nouveau 0000:02:00.0: Detected a DAC output
[   10.351730] [drm] nouveau 0000:02:00.0: Detected a TMDS output
[   10.351732] [drm] nouveau 0000:02:00.0: Detected a DVI-I connector
[   10.351776] [drm] nouveau 0000:02:00.0: Detected a VGA connector
[   10.351793] [drm] nouveau 0000:02:00.0: Detected a HDMI connector
[   10.545637] [drm] nouveau 0000:02:00.0: allocated 1280x1024 fb: 0x40250000, bo ffff88011cf63800
[   10.546996] [drm] nouveau 0000:02:00.0: 0x1203: parsing clock script 0
[   10.547902] Console: switching to colour frame buffer device 160x64
[   10.549480] fb0: nouveaufb frame buffer device
[   10.549481] drm: registered panic notifier
[   10.549483] Slow work thread pool: Starting up
[   10.549560] Slow work thread pool: Ready
[   10.549565] [drm] Initialized nouveau 0.0.16 20090420 for 0000:02:00.0 on minor 0
[   12.004543] [drm] nouveau 0000:02:00.0: Allocating FIFO number 2
[   12.007227] [drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 2
[   12.607816] EXT4-fs (sda8): re-mounted. Opts: errors=remount-ro,commit=0
[   14.463259] EXT4-fs (sda8): re-mounted. Opts: errors=remount-ro,commit=0

Użytkownik pijany marins edytował ten post 17 grudnia 2010 - 10:12

[Amciek]

jeszcze

sudo iwconfig

[pijany marins]

jeszcze

sudo iwconfig

jest do góry jako 1 .

[Amciek]

iwconfig a ifconfig to podobne, ale inne komendy ;]

Użytkownik Amciek edytował ten post 17 grudnia 2010 - 10:23

[pijany marins]

my bad sorki:P

lo        no wireless extensions.

eth0      no wireless extensions.

[Amciek]

na moje tak jakby w ogóle nie widział karty. Nie ma ślagu w logach. Niech no pomyślę

[pijany marins]

no ale jak nie widzi jak 9.10 widział, i teraz z windowsa pisze ;p na tej samej karcie ;D

[pijany marins]

juz nie mogę edytować ,ale dodam iż udało mi sie doinstalowac z płytyki

ndiswrapper

i zainstalowałem sterownik airplus.inf . Lecz niestety nie mogę połączyć się z żadną siecią , Amciek może wiesz ocb?

[Amciek]

standardowo

sudo ifconfig
sudo iwconfig
sudo dmesg | less

[pijany marins]

oto wyniki:


sudo ifconfig

eth0      Link encap:Ethernet  HWaddr 00:24:1d:5c:c8:18  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:41 Base address:0xa000 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:16 errors:0 dropped:0 overruns:0 frame:0
          TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:960 (960.0 B)  TX bytes:960 (960.0 B)

sudo iwconfig

lo        no wireless extensions.

eth0      no wireless extensions.

sudo dmesg | less

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.35-22-generic (buildd@allspice) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu4) ) #33-Ubuntu SMP Sun Sep 19 20:32:27 UTC 2010 (Ubuntu 2.6.35-22.33-generic 2.6.35.4)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-22-generic root=UUID=b12d8018-2174-4643-859f-ad37f8eb53eb ro quiet splash
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cfff0000 (usable)
[    0.000000]  BIOS-e820: 00000000cfff0000 - 00000000cfff3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cfff3000 - 00000000d0000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000e8000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.4 present.
[    0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found